YARBO GY-2107L NEW fever fiber optic cable ---- clear and true digital sound reproduction!
Using high quality superconducting optical fiber material through multi-layer coating material protection process, directly reduce the reflection of the optical fiber wall, and then polished precision equipment; two high-precision metal terminal assembly precision optical terminals, to ensure that optical signals can be highly accurate transmission focus, light Signal fidelity is far higher than the general optical fiber line; and can completely eliminate the digital signal from any inductance and electromagnetic interference, is the best guarantee high-resolution audio replay.
YARBO / GY-2107L / Optical Fiber Introduction:
YARBO fiber optic cable, soft, good bending, the use of imported optical fiber core distortion is small, the bandwidth is 5-10 times the domestic core, widely used in CD, DVD, Amplifier, DAT, LD and other digital equipment, high resolution Degree of audio replay the best guarantee.
YARBO optical fiber advantages
First, the use of special micro-convex lens at both ends of the fiber, so that a high degree of beam aggregation, mate to reduce the beam reflected in the fiber wall, thus shortening the transmission stroke, even in the case of extreme distortion of the wire, but also to maintain a high degree of signal fax, Can reduce the transmission time difference, effectively reduce the digital time difference distortion, and the convex design of the micro-convex lens close to the optical input, to ensure that the distortion caused by the connection to minimize the distortion.
Second, the fiber must not be any power or electromagnetic signals caused by noise interference, and ensure that the digital transmission frequency of up to 250Mbit / s, far more than the general digital cable, so that music resolution is higher, is the most reliable digital transmission media , Widely used in digital equipment such as CD / DVD / DAT / MD / LD, is the best guarantee for high-definition audio playback.
Third, optical digital cable is suitable for transmission of digital audio signal medium, unlike the traditional copper wire as the conductor signal connection, susceptible to electromagnetic interference around the optical fiber cable to send high-quality and clear tone is the traditional wire can not be compared In particular, the transmitted digital signal can be 5.1-channel audio distribution via a digital decoder to form ring-field audio, and the digital fiber is also the best way to record high-quality audio.
1. Optical fiber is a more precious material, do not use when folded.
2. Optical fiber audio signal is converted into light on the fiber conductor on the spread, so please keep the interface clean and dust-free.
3. When plugging, please grasp the plug part plug, do not pull core.
4. Bending radius of the optical fiber should not exceed 15 times the optical fiber diameter.
Usage: Unplug the dust caps at both ends of the optical fiber cable plug, and then insert the optical interface (OPT OUT, OPT IN) of each device.
To combat the counterfeit and imitation of the Yabo wire and terminals, <YARBO AUDIOPHILE> A full range of original products Abacus, has been fully used genuine logo and packaging seals
At the same time also need to pay attention to the original color printing seal intact to ensure that genuine licensed, only access to Fort quality assurance and after-sales service.
All YARBO product packaging boxes are on the security labels and built-in product certification, as the only product quality assurance and after-sales service certificate!